EXPERT VIEW

Sure! Here are 10 plumbing tips to keep in mind while installing tanks:

1. Properly position the tank: Ensure that the tank is placed on a stable and level surface to prevent any future problems with leakage or damage.
2. Follow manufacturer’s instructions: carefully read and follow the installation instructions provided by the tank manufacturer to ensure correct installation.
3. Use appropriate fittings and connectors: Use the recommended fittings and connectors that are suitable for the type of tank you are installing to ensure proper connection and prevent leaks.
4. Install a shut-off valve: Install a shut-off valve in the water supply line to the tank so that you can isolate the tank whenever required for maintenance or repairs.
5. Insulate the tank: If the tank is located in an unheated space, consider insulating it to prevent freezing in cold weather.
6. Provide adequate ventilation: Ensure that the tank is properly ventilated to prevent the buildup of harmful gases and odours.
7. Securely fasten the tank: Securely anchor the tank to prevent any movement or tipping, especially in areas prone to seismic activity.
8. Check for leaks: Inspect all connections and fittings for leaks before filling the tank. Fix any leaks immediately to avoid water damage.
9. Use Teflon tape or pipe sealant: Apply Teflon tape or pipe sealant to threaded connections to create a watertight seal and prevent leaks.
10. Test the tank: After installation, test the tank by filling it with water and checking for any leaks or abnormal functionality. Make any necessary adjustments or repairs as needed.